Perform this procedure to display the IPsec routes configured on the Fabric IPsec Gateway Virtual Machine (VM).
enable
virtual-service WORD<1-128> console
Note
Type CTRL+Y to exit the console.
show ipsec-routes
Switch:1> enable Switch:1# virtual-service figw console Connected to domain figw Escape character is ^Y <cr> FIGW> show ipsec-routes 192.0.2.30 via 192.0.2.20 dev eth0.125 mtu lock 1950 192.0.2.1/24 dev eth0.30 proto kernel scope link src 192.0.2.2 192.0.2.10 via 192.0.2.45 dev eth0.30 192.0.2.100/24 dev eth0.125 proto kernel scope link src 192.0.2.60 192.0.2.11/16 dev docker0 proto kernel scope link src 192.0.2.12 linkdown